Streaming engineer can be in a different location or room (and may also be looking after visuals for the stream).Totally separate or partially separate control from the main mix without using up a mix on the SQ.
#How to live stream on mac using mixx Patch#
Patch the output from your DAW to your streaming app or platform. Set up your DAW with a track for each channel and with each input sourced from the separate SQ USB channels. Connect and select the SQ as the audio interface in your DAW. Patch Input Direct Outs to USB output sockets 1-to-1, so Input Direct Out 1 goes to USB output socket 1, Input Direct Out 2 goes to USB output socket 2, Input Direct Out 3 goes to USB output socket 3 etc…. Turn off ‘Follow mute’ to ignore channel muting on the SQ. Turn off ‘Follow fader’ to send a consistent level to your DAW. Set the Global Direct Out Source to ‘Post Delay’ to include all processing. Muting inputs from either position will affect both engineers. User permissions and/or use of SQ4You will offer protection against accidental changes to the main mix by the streaming engineer (!). Either through the device being used for streaming, or using a feed from the outputs of the SQ. Streaming engineer will need to monitor the mix. 
Streaming engineer can be in a different location or room (and might also be looking after visuals for the stream). Main engineer can concentrate on the main mix. Totally separate level control from the main mix. Connect SQ-MixPad or SQ4You and select the stream mix to control it. Set channel source to ‘Post-All’ so all input channel processing is included. Set to ‘All-Pre’ so send levels are independent from the main mix. Select a stereo mix for your stream mix. The stream mix may not be constantly monitored but can be checked easily using PAFL on the mix master. Mix processing for the main LR and stream mix is separate. ambient microphones) can be included in the stream mix. Follows level changes and muting of inputs in the main mix. Separate level, panning and assignments of input channels from the main mix. Connect and select the SQ as the stereo input device in your streaming app or platform. 
Patch the mix to USB output sockets 1&2.Use GEQ, PEQ and Compression on the mix to adjust your stream without affecting the Main LR output.Start with all input faders at 0dB for sends to your mix, then cut or boost levels later if needed.Set mix channel source to ‘Post-All’ so all input channel processing is included.Set to ‘All-Post’ so all sends follow level changes in the main mix.Assign all the input channels you want to include in the stream mix.Select a stereo mix as your stream mix.
0 kommentar(er)
